Linoleum is a great material for the flooring of any part of the house. Whether it is used in the dining room or the kitchen, it just looks great. And it is also quite durable and made to last. That is why it is so important to make sure that you maintain it well. You will know that you need to do something when you start seeing that the linoleum flooring already has yellow stains. Just be ready to work extra hard to remove the stains from the flooring. Read the simple steps on how to do it below.
Table of Contents
Steps to Remove Yellow Stains from Linoleum
We are going to take a look at two simple methods to remove yellow stains from linoleum. The first is the sunlight method and the second one is the baking soda method.
The Sunlight Method
You are going to need:
- Sunlight
Directions:
- First, you need to realize that the lack of sunlight is what’s causing the yellow stains. So direct sunlight will certainly help remove it.
- If there are any rugs, simply remove them and let the affected areas have some time under direct sunlight.
- How long should the affected areas be exposed to sunlight? That will depend on the severity of the yellow stains on the affected areas.
- When the yellow stains are gone from the affected areas, just make sure that you periodically expose the linoleum to the sun to avoid any discoloration in the future.
The Baking Soda Method
You are going to need:
- Baking Soda
- Soft Cloth
- Water
Directions:
- Remove the rugs over the linoleum and clean it of any dirt.
- Wet the affected area.
- Take baking soda and sprinkle it over the affected area. Let it sit for the next 10 to 15 minutes.
- Wipe away the baking soda with the use of a soft cloth.
- If the yellow stains are too strong, you might need to repeat the process a few times.
- After the affected area is completely free from the yellow stains, continue using baking soda for any subsequent cleanings. This will prevent the return of the yellow stains.
[crp]
Common Questions About Yellow Stains on Linoleum
How Do You Clean Linoleum with Hydrogen Peroxide?
Hydrogen peroxide is definitely effective in cleaning linoleum. It is particularly useful for the removal of organic stains such as blood and urine. If the stain is not too deep then you will only need to wipe it using a clean cloth and hydrogen peroxide.
But if the stain is a little deeper, you will need to soak a clean cloth hydrogen peroxide. Place it over the stained area and use a heavy object to weigh it down. Check out the cloth from time to time. If it starts to look dirty, simply replace it with a new one. You will need to continue doing this until the stain is gone from the linoleum.
How Do You Get Mould Stains Out of Vinyl?
You will need the following to remove mould stains out of vinyl:
- Soft, clean cloths
- Soft bristled brush
- Bucket
- Dish detergent
- Denatured alcohol
- Germicidal soap
- Vacuum
- Fan or electric heater
- Towel
Here are the steps to remove mould stains from vinyl:
- Take a bucket that contains one gallon of warm water and mix it with one or two tablespoons of dish detergent.
- Get a soft-bristled brush and dip it into the bucket. Use the brush to scrub away any mould stains from the surface of the vinyl. Make sure to rinse the brush in the bucket whenever it is needed.
- Wipe the surface of the vinyl using a clean, damp cloth.
- Use a towel to dry the vinyl. Move the vinyl to a well ventilated and dry area if you can. This will help prevent the growth of mould in the future.
Can You Use Bleach on Linoleum Floors?
Linoleum is quite easy to clean. It is able to withstand any cleaning product more than other surfaces. So if your linoleum flooring already needs some serious cleaning because of stains or disinfecting, it would be easy enough to do. You can use bleach to do either of those. Just be sure to prepare your floor by cleaning it thoroughly before using bleach on it.
While bleach is relatively safe to use on your linoleum flooring, you still need to dilute it using water. Make sure that you use a lot of water for this purpose. Mix one gallon of water with ¾ cup of bleach in a large bucket. You can use a mop for applying it to the linoleum flooring. When the floors have been thoroughly soaked, you will let it sit for around five minutes. After that, you can rinse it using clean water before letting it dry.
Conclusion
Linoleum is a fine choice as the flooring material for different parts of the home. It is quite durable and resistant to wear and tear. It is also relatively easy to clean. So if you find that your linoleum flooring has any yellow stains or any dirt, you need not despair. You only need to know the right solutions – and that includes the right materials and processes to remove the unwanted stains.