Iodine is often utilized as a topical solution to treat minor wounds or bruises. The only downside is that it can easily stain clothes as well as upholstery, carpets, or bed sheets.
The Betadine stains are usually brownish-yellow and can be difficult to remove if left for some time. Due to this, it is vital to deal with this type of stain right away whether on your clothes, upholstery, or carpet.
You can get our Betadine stains out by following these steps: Rinse the clothes as soon as you notice the stains. Make a solution of ammonia, cool water, and liquid laundry detergent. Soak it for 30 min. Wash the clothes as you normally would.
Read further to learn the techniques on how to remove Betadine stains in more detail or if you have a more stubborn stain.
Table of Contents
Steps on how to remove Betadine stains on clothes or other types of fabrics
A Betadine stain can be unsightly on your clothes or even on pillow or bed sheets. Let us take a look at the steps on how to remove Betadine stains on fabrics.
- Flush the fabric with water once you discover any stains. Allow the water to flow onto the stain until the area is fully saturated. The purpose of flushing is to prevent the stain from setting.
- Prepare a solution of ammonia, cool water, and liquid laundry detergent.
- Immerse the garment completely into the solution. Let it soak for up to 30 minutes. If you have a non-washable fabric, clean the stain by dipping a cloth into the solution and dab at the stain gently.
- Wring out the garment and wash normally. Check the garment before drying. If the stain is completely removed, put it in the dryer. If a trace of the stain lingers, continue treating the garment until fully removed.
- For stubborn stains, prepare a stronger solution using water and sodium thiosulfate. Dip a clean white cloth into the solution and carefully dab on the stain. Rinse the stain with cool water to remove the solution. Wash the garment normally.
How to remove Betadine stains from upholstery
- Prepare a solution of cool water and dishwashing liquid.
- With a clean white cloth or towel, dip into the solution and dab on the stain. You will notice that the stain is being lifted from the upholstery.
- Leave the solution to soak into the stain for up to 30 minutes once you cannot lift any more stain from the fabric.
- In case the stain is not completely removed, repeat steps 2 and 3, blotting the stain and allowing it to soak up for 30 minutes. After a few repetitions, the stain should be gone. If completely removed, moisten a clean cloth with water and blot at the stain to remove the solution.
For a stubborn stain on upholstery, prepare a solution with a cup of cool water and a tablespoon of sodium thiosulfate. Use an eyedropper to place several drops of the solution directly on the stain. Follow-up by applying a few drops of ammonia on the stain. Use a dry cloth to blot the site which will absorb the liquid and lift the stain. Moisten a clean cloth with cool water and dab on the site to remove any traces of the solution. Lastly, use another clean cloth to blot the area until dry.
Dealing with Betadine stains on carpet
- Pour dry cleaning solvent on a clean white cloth.
- Carefully dab at the stained area. Continue blotting until no more stain can be lifted. If it cannot remove the stain, use another method. Before doing so, moisten a cloth with water and dab on the stained area to soak up the dry cleaning solvent. Pat until dry with a cloth.
- Blot the stained area using a dishwashing solution. Dab a white cloth soaked with the dishwashing solution onto the stain. Continue dabbing until you cannot lift any more stain.
- Prepare a vinegar solution if the dishwashing solution cannot completely remove the stain. Combine 1/3 cup of white vinegar and 2/3 cup of water. Soak a clean white cloth into the solution and dab on the stained area.
- If the stain persists, prepare an ammonia solution by mixing a tablespoon of ammonia and ½ cup of water. Dip a clean cloth into the solution and dab at the stain.
- Blot the stain again with the dishwashing solution. The objective is to pick up any leftover stain as well as lift away traces of the vinegar and ammonia solution.
- Sponge the area with cool water once the stain is completely removed. This should completely remove any leftover solution and leave your carpet stain-free.
How do you get Betadine off vinyl?
Vinyl flooring is considered as one of the durable options in the market today when it comes to resistance to wear and tear, stains and scratches. Nevertheless, even the tough vinyl flooring has a difficult time resisting iodine.
It is important to note that iodine is one of the substances that seem to stain almost anything it comes in contact with. Luckily, there are options to clean it up when it accidentally spills on vinyl flooring.
Acting right away is vital when dealing with Betadine stains on vinyl flooring. The longer it is left to sit on the floor, the harder it will be to remove. When a spill occurs, clean it up immediately. Remember that iodine present in Betadine can leave behind undesirable yellowish stains if not cleaned up right away.
When dealing with a Betadine spill on vinyl flooring, you need to prepare a solution that contains cool water and sodium thiosulfate granules. Dip a sponge into the solution and rub it on the stained area. Rinse the site with clean water and repeat if needed.
It is not advisable to use bleach when treating an iodine stain. A chemical reaction between bleach and iodine can result in a lasting stain that is usually permanent.
Is Betadine the same as iodine?
Betadine is the brand name of any product that is typically described as a brown colored liquid that consists of povidone and iodine.
It is important to note that povidone is essentially a polymer that is bonded with the iodine present in the substance. The amount of iodine present in the solution typically varies from 9 to 12%.
How do you remove iodine stains?
Iodine is a handy item when cleaning up wounds, but when it comes in contact with a household surface, it can be difficult to deal with. Let us take a look at ways on how to remove iodine stains on different materials.
- For fresh stains, flush with cold water.
- Soak in a solution of 1-quart cool water, a tablespoon of ammonia and ½ teaspoon of bleach-free liquid laundry detergent for up to 30 minutes.
- Wash the garment with the iodine stain.
- For old or stubborn stains, prepare a solution that includes a tablespoon of sodium thiosulfate and a cup of cool water. With a white cloth, soak into the solution and sponge on the stain. Rinse after thoroughly.
- Wash the garment again.
- Prepare a solution by mixing a tablespoon of liquid dishwashing detergent with 2 cups of cool water.
- With a clean white towel, soak into the solution and rub on the stained area and leave it in place for 30 minutes.
- Blot until the liquid is fully absorbed.
- Repeat steps 2 and 3 until the stain vanishes.
- Sponge with cold water and blot until dry to remove the solution.
- With a clean white cloth, dab on the stain with a dry cleaning solvent.
- Continue blotting until the solvent is soaked up.
Does betadine stain?
Betadine will usually not make any permanent stains on your skin, fingernails, or hair. But you will be able to see where it’s been applied to your skin. If you end up with Betadine on clothes such as cotton it can leave stains, but they are often not that difficult to get out.
Betadine is known to stain almost any material or surface it comes in contact with. Due to this nature, it is important to get rid of any stains once you discover one. With the techniques discussed on how to remove Betadine stains, you can effectively eliminate Betadine stains on different types of materials and surfaces.